iPod to ScreenPlay Audio Link

iPod to ScreenPlay Video Link

Time Base Corrector

PC to ScreenPlay Image Transfer Kit

Component Output Kit (SCART Cable)

Hanns Starlight Blue 15" LCDTV

iPod to ScreenPlay Audio Link
Now you can connect your iPod (or other MP3 player) to ScreenPlay and transfer
any MP3 song in realtime. Simply connect the cable to your player and connect
the RCA jacks to the front of ScreenPlay and record the audio track as it plays
from the player.

iPod to ScreenPlay Video Link
Now you can connect your video iPod to ScreenPlay and transfer any video
program in realtime. Simply connect the cable to your player and connect the
RCA jacks to the front of ScreenPlay and record the video track as it plays
from the player.

Time Base Corrector
Single Channel Full Frame 4:2:2 TBC with DA
Improve Video Signal Quality and get clean video captures. Most video camcorders
produce relatively unstable, synchronized signals. This can cause poor video image
quality when capturing to your PC or recording to another deck. The TBC-100 corrects
this by replacing all sync signals from the video source with new signals.

• Self contained - stand alone
• Compatible with VHS, VHS-C, S-VHS, S-VHS-C Video 8, Hi 8 & Digital 8 format
• Digital frame synchronization with full frame memory
• Re-generates all synchronization signals to stabilize the video
• Auto-detects NTSC or PAL format
• Wide bandwidth-4.5MHz in Y/C and 3.5MHz in composite
• 8-bit video resolution–4:2:2 sampling rate DP < 1 Degree–DG less than 2%
• Low noise - S/N ratio > 50dBBuilt in DA with 4 outputs

View Complete Product Specifications

PC to ScreenPlay Image Transfer Kit
Used to transfer JPEG, TGA, or BMP images to ScreenPlay. Kit includes a
32MB Compact Flash, USB Adapter, PCMCIA adapter for ScreenPlay.

Component Output Kit (SCART Cable)
Add Component Ouput capability to your ScreenPlay!

The SCART cable allows you to output a Component video signal from the ScreenPlay
to the Component input of your video or DVD recorder. Note: Your video or DVD recorder
must feature Component inputs.

The SCART cable features a SCART connection on one end, which connects to the ScreenPlay and BNC connections, which connect to your recorder. Note: In some case
you may need to acquire a set of BNC to RCA converters to be able to connect to your recorder (available at any good A/V electronic store).

The Component Output Kit is not available for Sequel.

HANNS STARLIGHTBLUE 15” LCDTV

Product Features